Loading Please Wait  Loading... Please wait...
  • EagleTac TX25C2
  • EagleTac TX25C2 w/ Holster

EagleTac TX25C2


Brand: Eagletac

Calculated at checkout
Current Stock:

Product Description


Control button is on the side of the head of the flashlight for easy control while holding the flashlight in a 'forward grip'. Powered by CR123A or 18650 batteries, with a body expansion available for adding more batteries.

What's Included

  • TX25C2 Flashlight
  • Rigid Nylon Holster w/ Self-Retention Device
  • Mil-Spec Paracord Lanyard w/ Quick Attachment Clip
  • Smooth Aluminum Bezel (installed on flashlight)
  • Titanium Coated Stainless Steel Pocket Clip (installed on flashlight)
  • Stainless Steel Split Ring (small)
  • Spare O-rings
  • User Manual

Optional Accessories


  • User replaceable glass lens.
  • Turbo boost technology.
  • Battery reverse polarity protection.
  • Tail stand capability


  • XM-L2 U2

Output and Runtime

XM-L2 U2

Regular Mode

  • LED Lumens: 1180*-910/557/8
  • ANSI FL-1 Lumens: 965*-746/459/7
  • Runtime:
    • 2x CR123A: 1/2/100+ hours
    • 1x 18650: 1.5/2.9/150+ hours

Tactical Mode

  • LED Lumens: 1180*-910/248/Strobe
  • ANSI FL-1 Lumens: 965*-746/208/Strobe
  • Runtime:
    • 2x CR123A: 1/4.5 hours
    • 1x 18650: 1.8/6.8 hours

Auxilery Outputs

  • Strobe / Strobe (Var) / Flash (High) / S.O.S. (Fast) / S.O.S. / Beacon / Flash (Low)

* Turbo boost provides 25% more power for the first 200 seconds on the highest output mode.

Beam Profile

XM-L2 U2

  • Center Lux: 15,800 lux
  • Center Spot Angle: 6.9°
  • Spill Light Angle: 54°
  • Beam Throw: 251 meters / 275 yards

Battery Type

  • 2x CR123A (3.0V Lithium) (Not Included)
  • 2x 16340/RCR123A (3.0V - 3.7V) (Not Included)
  • 1x 18650 (3.7V Li-Ion) (Not Included)
  • Compatable Battery Size:
    • Diameter: 16 - 17 mm
    • Length (Single Cell): 67 - 69 mm
    • Length (Two Cells): 34 - 34.6 mm (each)

Battery Options w/ Body Extensions

  • 1x 3-Cell Body Extension
    • 3x CR123A or 16340/RCR123A
  • 1x 4-Cell Body Extension or 2x 3-Cell Body Extension
    • 4x CR123A
    • 2x 18650
  • 2x 4-Cell Body Extension
    • 3x 18650

Operating Voltage

2.7V - 12.6V

* Exceeding 12.6V can cause damage to the LED and circuit, potentially eliminating output levels or fully disabling the flashlight.


  • Waterwhite Glass w/ Hardening Treatment
  • Anti-reflective (AR) coating on both sides (96% trasnparency).

LED Circuit


  • Synchronous Buck w/ efficiency up to 95%.
  • Non-Dimming Constant Current Regulation for all output levels w/o flickering.
  • Low Dropout Voltage, enable circuit to current regulate, even with a single 18650 (3.7V) for most of the runtime at turbo output.
  • Low Battery Voltage Warning
  • Very Low Standy Current (uA)
  • Turbo Boost Technology

Body Material

  • HAIII hard anodization aerospace aluminum


  • Smooth aluminum reflector


  • IPX-8 standard


Head Diameter: 1.5 inches ( 31.5 mm)

Body Diameter: 1 inches ( 25 mm)

Length: 4.7 inches ( 120 mm)

Weight w/o Batteries: 3.4 ounces ( 95 grams)



  • Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
  • For momentary on, press and hold the button switch for immediate output.
  • Twist the head to select between three output levels. You can pre-select the desired output level before turning on the flashlight.

Instant Turbo output

  • At any output level, press and hold the flashlight for 100% output.
  • Release the button to return to previous level.

Instant Strobe output

  • At any output level (or off), double press and hold the on/off button switch for strobe output.
  • Release the button to return to previous level (or off).

To access auxiliary levels

  • Starting at head tight position (1st level), loosen to 3rd level and then tighten the head within one second to enter auxiliary setting.
  • Repeat to cycle through all settings.
  • Turn off the light or loosen the head to quit.

(Programmable Features) Mode switching:

  • To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.

(Programmable Features) Energy saving feature:

  • Enabled by default, this feature reduces output by 25% (or 10% when disabled) after 200 seconds at turbo mode.
  • To toggle this feature, turn on the flashlight at 3rd level, and dial to 2nd level and then back to 3rd level for ten times within five seconds.






  • Ten years performance guaranteed warranty

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!