EagleTac P20C2 XML

MSRP: $79.95
Was: $59.95
Now: $20.00
(You save $59.95 )
Write a Review
SKU:
ET-P20C2-XML-XWar
Shipping:
Calculated at Checkout

Highlights

Designed to upgrade as LED technology advances, the head module can be removed and replaced with a drop-in module with a different LED and driver circuit. This design is also great for replacing the LED when it eventually dies... which with 50,000+ hours (2083 day) of life for the LED, it will take over 5 years of constant (instant battery changes and never turning it off) use to burn out the LED.

What's Included

  • Stainless steel bezel (removable)
  • Spare O-rings
  • Titanium coated stainless steel pocket clip
  • User manual
  • Heavy Duty Nylon Holster w/ self-retention device and flip
  • Mil-Spec Paracord Lanyard w/ quick attachment clip

Features

  • Upgradeable LED module drop-in
  • User replaceable glass lens
  • Turbo boost technology
  • Battery reverse polarity protection
  • User removable pocket clip

Kit

  • Red
  • Green
  • Blue
  • Yellow

Kit Information

LED

  • Cree XM-L T6

Max Output

CREE XM-L T6:

  • LED lumen: 720
  • ANSI FL-1 lumen: 524

Beam Profile

 

Output and Runtime

XM-L T6

  • Led lumen: 720*-456/96/9
  • ANSI FL-1 lumen: 524*--/-/-
  • Runtime: 1.2/10/100+

Hidden auxiliary outputs

  • Strobe/Flash-Hi/S.O.S./Beacon
* Turbo boots lasts 200 seconds then lowers the output.

Battery Type

  • 2x CR123A
  • 2x 16340

Compatible battery diameter/length

  • 123A: (16-16.8mm/34-34.5mm)
  • Button Top

** Does not fit 17650 or larger batteries.

Operating Voltage

3.7V - 9.0V

Lens

  • Impact resistance waterwhite glass lens
  • Anti-reflective (AR) coating both sized

LED Circuit

 

Body Material

  • HAIII hard anodization aerospace aluminum

Reflector

  • Very light textured aluminum reflector

Waterproof

  • IPX-8 standard

Dimensions

Head Diameter: 1 inches (26 mm)

Body Diameter: 0.8 inches (21 mm)

Length: 5.1 inches (130 mm)

Weight w/o Batteries: 2.8 ounces (79 grams)

Operations

Tactical forward clicky switch

Basic

  • Turn on the light by pressing the tailcap button until it clicks.
  • Tight the head to enable the Turbo output mode, loose the head for general output mode.
  • You can pre-selected output level before turning on the light.

Advanced

  • Starting with the head loosen, tight and loose the head within 1 second to enable hidden modes. Repeat to cycle through all hidden auxiliary modes.
  • Turn on and off the flashlight for 20 times (each click must be within one second) to toggle tailcap strobe settings. When this feature enabled, a double press of the switch will activate strobe mode.

p20c2-operations.jpg

Controls

p20c2-controls.jpg