Eagtac P20A2 XML2 or XPG2

Eagtac

$69.95
Write a Review
SKU:
ET-P20A2-XPG2
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Highlights

LED module can be replaced by the user to allow upgrade of the emitter when LED technology advances.

What's Included

  • Stainless steel bezel (removable)
  • Spare O-rings
  • Titanium coated stainless steel pocket clip
  • User manual
  • Heavy Duty Nylon Holster w/ self-retention device and flip

Features

  • Upgradeable LED module drop-in
  • User replaceable glass lens
  • Turbo boost technology
  • Battery reverse polarity protection
  • User removable pocket clip

Kit

  • RGBY Filter Set

LED

  • CREE XP-G2 R5 LED (Cool White)
  • CREE XM-L2 U2 LED (Cool White)

Max Output

CREE XM-L2 U2:

  • LED lumen: 453
  • ANSI FL-1 lumen: 329

CREE XP-G2 R5:

  • LED lumen: 365
  • ANSI FL-1 lumen: 265

Beam Profile

CREE XM-L2 U2 LED

  • Center lux: 3520
  • Center spot angle: 11.4°
  • Spill light angle: 59°
  • Beam distance: 130 yards / 119 meters

CREE XP-G2 R5 LED

  • Center lux: 6100
  • Center spot angle: 7.4°
  • Spill light angle: 56°
  • Beam distance: 171 yards / 157 meters

Output and Runtime

XM-L2 U2

  • Led lumen: 453*-365/75/10
  • ANSI FL-1 lumen: 329*-263/58/8
  • Runtime: 1.5/8/100+

XP-G2 R5

  • Led lumen: 365*-294/69/11
  • ANSI FL-1 lumen: 265*-211/56/8
  • Runtime: 1.5/8/100+

Hidden auxiliary outputs

  • Strobe/Flash-Hi/S.O.S./Beacon/Flash-Lo
* Turbo Boost reduces the output level after 200 seconds of runtime.

Battery Type

  • 2xAA
  • Button Top

Operating Voltage

  • 0.8V - 3.2V

Lens

  • Impact resistance waterwhite glass lens
  • Anti-reflective (AR) coating both sized

LED Circuit

A950 V current regulated circuit

  • Efficiency: up to 90%

Body Material

  • HAIII hard anodization aerospace aluminum

Reflector

  • Smooth aluminum reflector

Waterproof

  • IPX-8 standard

Dimensions

Head Diameter: 1 inches (26 mm)

Body Diameter: 0.8 inches (21 mm)

Length: 6.3 inches (162 mm)

Weight w/o Batteries: 3.2 ounces (91 grams)

Operations

Tactical forward clicky switch

Basic

  • Turn on the light by pressing the tailcap button until it clicks.
  • Tight the head to enable the Turbo output mode, loose the head for general output mode.
  • You can pre-selected output level before turning on the light.

Advanced

  • Starting with the head loosen, tight and loose the head within 1 second to enable hidden modes. Repeat to cycle through all hidden auxiliary modes.
  • Turn on and off the flashlight for 20 times (each click must be within one second) to toggle tailcap strobe settings. When this feature enabled, a double press of the switch will activate strobe mode.

p20a2-operations.jpg

Controls

p20a2-controls.jpg

Warranty

  • Ten years performance guaranteed warranty