Loading Please Wait  Loading... Please wait...
  • EagleTac MX25L4C
  • EagleTac MX25L4C

EagleTac MX25L4C


Brand: Eagletac

Calculated at checkout

Product Description



Uses four Cree XM-L2 U2 LEDs to achieve over 4000 lumens output and 490 meter beam throw. Blue/Red battery level indicator, turns red as batteries get low and begins flashlight when almost depleted.

What's Included

  • MX25L4C Flashlight Kit Version
  • Spare O-Rings (2)
  • User Manual
  • Mil-Spec Paracord Lanyard w/ Quick Attachment Clip
  • CR123A Battery Magazines (4)
  • Heavy duty nylon holster w/ self-retention device and open-top design.


  • LED direct soldering on copper for maximum heatsink ability.
  • User replaceable glass lens.
  • Battery reverse polarity protection.
  • Tail stand ability.
  • Ultra low internal resistance phosphor bronze springs (silver coated).


  • Signal connection through the body tube for rear accessories and add-ons.
  • Tailcap w/ switch and tail stand ability (as well as regular smooth tailcap).
  • Threaded bezel for mount for attachment of stainless steel bezel or filters.
  • Threaded stainless steel bezel.


4x Cree XM-L2 U2 (Cool White)

Output and Runtime

4x XM-L2 U2

  • Regular Mode:
    • LED Lumens:  4800*/2180/410/18
    • ANSI FL-1 Lumens: 4020*/1830/345/15
    • Runtime 4x 18650: 1.5/2.5/20/300+ hours
    • Runtime 8x CR123A: 0.9/1.7/11/150+ hours
  • Tactical Mode:
    • LED Lumens: 4800*/1000/Strobe I/Strobe II
    • ANSI FL-1 Lumens: 4020*/835/Strobg I/ Strobe II
    • Runtime 4x 18650: 1.5/7 hours
    • Runtime 8x CR123A: 0.9/4.8 hours
  • Auxiliary Outputs:
    • Strobe/Strobe (var)/Flash (high)/S.O.S. (fast)/S.O.S./Beacon/Flash (low)
*Turbo output is reduced by 25% after 200 seconds of runtime when energy saving feature is turned on.

Beam Profile

4x XM-L2 U2

  • Center Lux: 60,100 lux
  • Center Spot Angle: 4°
  • Spill (Flood) Angle: 51°
  • Beam Distance (Throw): 536 yards / 490 meters

Battery Type

4x 18650 (Not Included)

8x CR123A (Not Included)

Compatable Battery Size:

  • Diameter: 16-16.8 mm / 18-18.8 mm
  • Length: 34-34.5 mm / 67-68.5 mm

Operating Voltage

10V - 24V

* Do not use 8x 16340 (RCR123A) 3.7V batteries as the total voltage will exceed 24V.
* Exceeding 24V may result in loss of flashlight outputs or destroy functionality of the flashlight.


  • Waterwhite glass lens w/ harden treatment.
  • Anti-reflective (AR) coating on both sides (96% transparency).

LED Circuit

C7000 HV

  • Wide voltage input range (10-24V).
  • 48 Watt output.
  • Low internal resistance design offers up to 93% efficiency - occurs when input voltage is very close to LED forward voltage.
  • Non-dimming constant current regulation for all output levels.
  • Negligible µA standby current.
  • Energy saving feature - reduces turbo output by 25% after 200 seconds of runtime.
  • High voltage mode to reduce output above 18V input.
  • Dual colour LED voltage report system.

Body Material

  • HAIII hard anodization aerospace aluminum


  • Smooth aluminum reflector


  • IP-x8 standard


Head Diameter: 2.5 inches (62 mm)

Body Diameter: 2 inches (52 mm)

Length: 5.6 inches (143 mm)

Weight w/o Batteries: 14.3 ounces (408 grams)


On/Off: Press and release button.

Momentary On: Press and hold the button. Flashlight turns off again when button is released.

Output Select: Tighten or loosen the head to select output level - can be selected while flashlight is off.


Instant Turbo: At any output level, press and hold the button for 100% output. Flashlight reverts to previous output when button is released.

Instant Strobe: At any output level or off, double-press and hold. Fashlight reverts to previous output or off when button is released.

Auxiliary Output Access: With flashlight head tight (output 1), loosen the head to output 3 or 4 and tighten again within 1 second. Repeat to cycle through auxilery outputs.


Regular/Tactical Mode Switching: With flashlight head tight (output 1), loosen head to output 2 and tighten again five times within five seconds.

High Voltage Mode: When initial startup voltage exceeds 18V (battery total voltage), the maximum output be reduced by 15%. This prevents circuitry overheating and occurs automatically.

LED Voltage Indicator:

  • Bue: High (8x CR123A > 16.5V) (4x 18650 > 14V)
  • Red: Moderate (8x CR123A > 13.5V) (4x 18650 > 12.4V)
  • Red Flashing: Low (8X CR123A < 13.5V)  (4x 18650 < 12.4V)




  • Ten years performance guaranteed warranty

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!