Loading Please Wait  Loading... Please wait...
  • EagleTac M25C2

EagleTac M25C2

Out of Stock

$159.95 $119.90
(You save $40.05)

Brand: Eagletac

Calculated at checkout
Current Stock:
Out of Stock

Product Description


Tactical flashlight sized body with a large head for increased beam profile.

What's Included

  • M25C2 flashlight with smooth aluminum bezel
  • Spare O-rings
  • Titanium coated Stainless steel pocket clip
  • User manual
  • Tail-stand rubber boot
  • Soft cigar holding grip
  • Cigar grip cover ring
  • Lanyard ring attachment ring
  • Mil-Spec Paracord Lanyard w/ quick attachment clip

Additional Options

4-Cell Body Extension - With base model to fit two 18650 or four CR123A batteries in the flashlight.

3-Cell Body Extension - With base model to fit three CR123A or three 16340 batteries in the flashlight.


  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Tactical rubber cigar grip (replaceable with grip cover)
  • Battery reverse polarity protection
  • User removable pocket clip
  • Tail stand ability with included tail stand boot


  • CREE XM-L2 U2

Max Output

  • CREE XM-L2 U2
    • LED lumen: 1180
    • ANSI FL-1 lumen: 980

Beam Profile

  • CREE XM-L2 U2
    • Center lux: 62,000 lux
    • Center spot angle: 5.7°
    • Spill light angle: 53.1°
    • Beam distance: 544 yards / 498 meters

Output and Runtime

  • Regular Mode
    • Led lumen: 1180*-936/536/104/8
    • ANSI FL-1 lumen: 980*-765/449/86/7
    • Runtime:
      • 1/1.9/11/100+ hours (2xCR123A)
  • Regular Energy Saving Mode
    • Led lumen: 1180*-790/536/104/8
    • ANSI FL-1 lumen: 980*-655/449/86/7
  • Tactical Mode
    • Led lumen: 1180-936/172/Strobe I/Strobe II
    • ANSI FL-1 lumen: 980-765/141/Strobe I/Strobe II
    • Runtime:
      • 1/7 hours (2xCR123A)
  • Tactical Energy Saving Mode (Default)
    • Led lumen: 1180-790/172/Strobe I/Strobe II
    • ANSI FL-1 lumen: 980-655/141/Strobe I/Strobe II
  • Seven hidden auxiliary outputs
  • Strobe/Disoriented Strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)
* Maximum output current will be reduced from 100% to 90% after 200 seconds at turbo output to prolong turbo output runtime.

Battery Type

  • 2xCR123A, 2xRCR123A, or 1x18650 li-ion
  • 3xCR123A, or 3xRCR123A  li-ion - using one 3-cell body extender.
  • 4xCR123A, or 2x18650 li-ion - using 4-cell body extender or two 3-cell body extenders.
  • 3x18650 li-ion - using two 4-cell body extenders or one 4-cell and two 3-cell body extenders.
  • Compatible battery diameter/length
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/67-68.5mm)
All batteries must have protruding top button. All rechargeable li-ion batteries (e.g. RCR123A and 18650) should be equipped with internal protection circuit against over-charge, over-discharge and short circuit.
Batteries are not included.

Operating Voltage

  • 2.7V - 12.6V


  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED Circuit

  • C3300 Extreme3
    • Synchronous buck w/ efficiency of up to 95%
    • Non-dimming constant current regulation for all output levels without flicking
    • Low dropout voltage, enable circuit to current regulate even with a single 18650 for most of the runtime at turbo output.
    • Low battery voltage warning
    • Turbo boost technology

Body Material

  • HAIII hard anodization aerospace aluminum


  • Smooth aluminum reflector


  • IPX-8 standard


Head Dia.

  • 2.5 inches (62 mm)

Body Dia.

  • 1.0 inch (25 mm)


  • 6.9 inches (176 mm)

Weight (w/o batteries)

  • 10.4 ounces (295 grams) 


  • Tactical forward clicky switch
  • Basic
  • Turn on the light by pressing the tailcap button until it clicks.
  • Twist the head to select between four pre-defined output levels.
  • You can pre-selected output level before turning on the light.


  • Advanced
    • Cycle through auxiliary modes: Tighten the head (1st level), and loosen to 3rd (or 4th level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
    • Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
    • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
    • Energy saving feature (on by default): M25C2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, M25C2 reduces output by 9% instead. To toggle this feature, twist the head to 4th level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).





  • Ten years performance guaranteed warranty
  • Proper maintenance goes a long way to ensure your light to serve in the toughest environment and years to come.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!