Skip to main content

Armytek Wizard Pro V3 XHP50 USB

Write a Review
Calculated at Checkout

Out of Stock

This is currently the most powerful version of the Wizard from Armytek. Capable of twice the output compared to the XP-L version and longer run times when run on similar outputs. (The XP-L Max output is 1120 LED lumens for 66 minutes, the XHP50 Second Turbo is 1250 LED lumens for 100 minutes.)

The built in charger is powered by a USB to Magnet cord. Plug in the wire to an available USB port and then, when the Wizard headlamp needs charging, easily connect the magnetic end of the wire to the tail cap of the headlamp - the magnets in both the tail cap and the wire will assist in making the connection.

Output Group Firefly Main
LED Lumens - - - - - -
OTF Lumens 0.15 1.5 5.5 30 165 390
ANSI/NEMA FL-1 Lumens - - - - - -
Run Time 200 d 40 d 12 d 50 h 10 h 40 m 4 h 10 m

Output Group Turbo / Max Strobe
LED Lumens - 2300 - - - -
OTF Lumens 900 1800 - 165 @ 1Hz 1800 @ 1Hz 1800 @ 10Hz
ANSI/NEMA FL-1 Lumens - - - - - -
Run Time 1 h 40 m 1 h - 35 h 3.5 h 2 h

* Outputs and run times based on 18650 3400mAh battery.

Beam Profile:
Hot Spot: 70°
Spill (Flood): 120°
Hotspot Diameter at 100m: 140 m
Center Lux: - lux
Peak Beam Intensity: 4200 cd
Beam Throw Distance: 130 m

1* 18650

Operating Voltage: 0.0V - 0.0V
Operating Temperature: -25°C to +40°C

On/Off Control: Button
- Single Click On: on at last used output
- Hold On: Firefly Outputs (Release right away)
-- Continued Holding: Battery Type Settings, Manufacturer Set to 18650
- Double Click On: Main Outputs
- Triple Click On: Max Output
- Quadruple Click On: Strobe Outputs

Mode Switch Control: Button (while on)
- While in Main, Double Click: Switch to Firefly Outputs
- While in Any Not-Main, Double Click: Switch to Main Outputs
- While in Any, Triple Click: Switch to Max Output
- While in Any, Quadruple Click: Switch to Strobe Outputs
- While in Firefly, Hold: Cycle Firefly Outputs
- While in Main, Hold: Cycle Main Outputs
- While in Max, Hold: Switch Turbo Outputs
- While in Strobe, Hold: Switch Strobe Outputs

Lock Out: Loosen Tail Cap 1/4 Turn
- Prevents flashlight from being activated.
- Battery level indication does not funciton while locked out.
- Required to use the built in charger.

Battery Level Indication: LED in Button
- Indicates the battery power level, by default it does not operate while in the off state or firefly outputs.
- Activate Off and Firefly Functionality: Loosen tail cap 1/4 turn, hold button, tighten and loosn tail cap, release button.
- Battery Levels:
>25% : flash every 5 seconds, green
<25% : flash every 2 seconds, orange
<10% : flash every second, red
- Internal Temperature:
Warm : flash 3 times with 2 second gap, orange
Hot : flash 3 times with 1 second gap, red

Charger Operation:
To begin charging:
- Plug the USB end of the wire into a USB port
- Unscrew the tail cap of the wizard 1/4 rotation.
- Connect the magnetic end to the tail cap of the Wizard.
Charging indicator: In the magnetic head of the charging cord
- Red: Charging
- Green: Charge complete or headlamp not connected
- Red Flashing: Unscrew the tail cap further (it is not yet 1/4 loosened)

Length: 10.1 cm
Body Diameter: 2.45 cm
Head Diameter: 2.9 cm
Weight (w/o Batteries): 48 g

LED: Cree XHP50
Tint: Cool White (----K)

** Exact colour temperature values are not provided.

Body Material: Aircraft Grade Aluminium
Body Finish: Premium Type III Hard Anodization 400HV

Lens: Impact Resistance Glass w/ Sapphire and Anti-Reflection Coating

Dust/Water Resistance Rating: IP 68
Impact Resistance: 10m
Submersible Depth: 10m

Package Contents:
 Wizard Multi-light (with built in USB charger)
 Pocket Clip
 2 Spare O-Rings
 Plastic Holder (Installed)
 Handband (Armband)
 Magnet (Integrated, Tail Cap Charging Port)
 Wire, USB to Magnetic-Connector
 18650 Li-Ion 3200mAh, Flat Top