Loading Please Wait  Loading... Please wait...
  • Eagletac DX30LC2-SR Colour
  • Image 2
  • Image 3
  • Image 4
  • Image 5

Eagletac DX30LC2-SR Colour (XP-L HI + 365nm Ultraviolet)

Out of Stock

$139.95

Brand: Eagletac

Quantity:
SKU:
ET-DX30LC2-SRc-XPL-365nm
Shipping:
Calculated at checkout
Current Stock:
Out of Stock

Product Description

   
Package Contents DX30LC2-SR Colour Flashlight
Manual
Spare O-Rings x2
Holster, Nylon
Lanyard
Pocket Clip, Spring Steel
CR123A Battery Magazine
USB Charging Cable (1m AWG24 Copper)
- Thin post for plugging into flashlight
AC to USB Wall Adapter (Output 5V @ 1A) UL Certified
18650 2600mAh Battery (Sanyo Cell)
Flashlight Dimensions
Body Diameter 2.2 cm Head Diameter 2.3 cm
Length 13.2 cm Weight (w/o Battery) / (w/ Battery) 67 g / 113 g
Batteries 1 x 18650
2 x CR123A
Operating Voltage 2.7V - 6.0V
Operating Temperature -25°C to +40°C
Charging Circuit L950 SC
Input USB 5V @ 1A+ Max Charging Current 950mA
Charging Logarithm Constant Current / Constant Voltage
Precise Voltage Detection Design ±1% No Trickle Charge
Smart Charging Level Report System Small Current Charging for Low Voltage Batteries (under 3.0V)
Circuit is designed to recharge a single 18650 battery. Do not attempt to recharge CR123A batteries.
LED Cree XP-L HI V3 + Custom 365nm
Colour Group Cool / UVA Colour Temperature ---- K / 365nm
XP-L HI V3
LED Lumens 1160 - 980 * 590 221 77 9
OTF Lumens - - - - -
FL-1 Lumens 905 - 790 * 475 178 62 7
Run Time (18560) 1 h 30 m 2 h 48 m 8 h 30 m 28 h 200+ h
Run Time (2x CR123A) 48 m 1 h 30 m 5 h 17 h 140 h
Center Lux 20,800 - - - -
Peak Beam Intensity - - - - -
Beam Throw Distance 288 m - - - -
           
365nm UVA (Ultraviolet Blacklight)
Radiant Flux 1100mW - - - -
Run Time (18560) 3 h 18 m 7 h 30 m 19 h 45 h 200+ h
Run Time (2x CR123A) 1 h 42 m 4 h 12 h 30 h 140 h
           

* Max output is reduced by 15% after 200 seconds (3 minutes 20 seconds) to preserve run time.

XP-L HI V3 Forward Profile
Hot Spot 5.2° Spill 62° Hot Spot Diameter at 100m 9 m Spill Diameter at 100m 120 m
Materials
Body Aircraft Grade Aluminum
Body Finish Premium Type III Hard Anodization 400HV
Lens Impact Resistant Glass w/ Sapphire and Anti-Reflection Coating
Ingress Protection Rating IP x8 Impact Resistance 1 m
  Submersible Depth 1 m
On/Off Controls On at Max: Press the tail cap button until click.
Tactical On at Max: Slightly press the tail cap button, but don't click.
On at Min: Hold the side button then click the tail cap button.
Off: Click or release the tail cap button.
Output Selection Press the side button to cycle by one output.
Forward LED Order: Min -> Low -> Med -> High -> Max <-
Side LED Order: Low -> Med -> High -> Max -> Max <-
Note: The side LED requires advancing output twice at highest output to return to the lowest output.
Forward or Side LED Switching Hold the side button for at least a second to switch to the other LED.
The active LED when turned off will be the active LED when turned on again - this means tactical on of the side LED is possible.

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!