Loading Please Wait  Loading... Please wait...
  • EagleTac SX25L3 - Basic (Black Bezel) and Kit (Steel Bezel)
  • EagleTac SX25L3 - Body images
  • EagleTac SX25L3 - Hand size comparison and holster.

EagleTac SX25L3 ( 1505 Lumens )

$149.95 $112.40
(You save $37.55)

Brand: Eagletac

Quantity:
SKU:
ET-SX25L3-U2-Basic
Shipping:
Calculated at checkout

Product Description

Highlights

Fits nicely in the hand during use and has an XM-L2 LED. Cool White (XM-L2 U2) is available as a kit model as well.

What's Included

  • SX25L3 flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Flat tail-cap (tail-stand)
  • 3xCR123A Battery Magazines (each holds 2xCR123A)

Features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Customizable energy saving feature
  • Battery reverse polarity protection
  • Tail stand

Kit Version

  • Signal connection through the body tube for rear accessories add-on (built into kit model body)
  • Tailcap w/ switch and tail-standing ability
  • Flashlight head comes with front-mount thread for bezel and filter attachment (built into kit model head)
  • Stainless steel bezel (remove to attach filters)
  • Heavy Duty Nylon Holster w/ self-retention device and open-top design
  • ET47 diffuser filter, ET47 yellow filter, ET47 red filter, ET47 green filter, ET47 blue filter.

LED

Cool White

  • CREE XM-L2 U2 LED (6500K)

Neutral White

  • CREE XM-L2 T6 LED (4300K)

Max Output

XM-L2 U2 LED

  • LED lumen: 1505
  • ANSI FL-1 lumen: 1245

XM-L2 T6 LED is about 7% less output than XM-L2 U2.

Beam Profile

XM-L2 U2

  • Center lux: 53,900 lux
  • Center spot angle: 6°
  • Spill light angle: 57.2°
  • Beam distance: 507 yards / 464 meters

Output and Runtime

XM-L2 U2 LED

  • Four brightness levels (Regular mode)
    • Led lumen: 1505*-1270/780/121/5
    • ANSI FL-1 lumen: 1245*-1054/648/99/4
    • Runtime: 2.7/5/32/370 hours
  • Two brightness levels (Tactical mode)
    • Led lumen: 1505*-1270/372/Strobe I/Strobe II
    • ANSI lumen: 1245*-1054/309/Strobe I/Strobe II
    • Runtime: 2.7/13 hours
  • XM-L2 T6 neutral white LED has approximately 7% less output lumen compared to the cool white U2 LED.

Seven hidden auxiliary outputs

  • Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Becaon/Flash(Lo)
Above testing is performed using 3x18650 3400mAh batteries and energy saving feature enabled.
* Turbo mode output reduces from 100% to 90% (75% with energy saving enabled) after 200 seconds of runtime.

Battery Type

3x18650 or 6xCR123A

Compatible battery (diameter/length)

  • 123A: (16-16.8mm/34-34.5mm)
  • 18650: (18-18.8mm/67-68.5mm)
  • Button Top

All batteries are connected in series, do not exceed the operating voltage of the flashlight. Do not use 6xRCR123A 3.7V batteries.

Operating Voltage

5.4V - 19V

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED Circuit

C5000 ST

  • Current regulated buck driver w/ efficiency of up to 93%
  • Wide voltage input range
  • Non-dimming constant current regulation for all output levels without flicking
  • Low battery voltage warning7
  • Energy saving feature5 (user adjustable to prolong runtime)
  • Very low standby current (uA)

Body Material

  • HAIII hard anodization aerospace aluminum

Reflector

  • Smooth aluminum reflector

Waterproof

  • IPX-8 standard

Dimensions

Head Diameter: 1.85 inches (47 mm)

Body Diameter: 1.8 inches (45.5 mm)

Length: 5.7 inches (144 mm)

Weight w/o Batteries: 10.9 ounces (309 grams)

Operations

  • Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
  • For momentary on, press and hold the button switch for immediate output.
  • Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
  • Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
  • Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
  • To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd or 4th level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
  • (Programmable Features) Mode switching: To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.
  • (Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 25% (or 10% when disabled) after 200 seconds at turbo mode. To toggle this feature, turn on the flashlight at 4th level, and dial to 3rd level and then back to 4th level for ten times within five seconds.

sx25l3-operations-001.png

sx25l3-operations-002.png

Controls

sx25l3-controls.jpg

Warranty

Ten years performance guaranteed warranty







Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!